Wanhao Duplicator D7 Plus – Low-cost, high-resolution DLP 3D printer
3D print with the Wanhao Duplicator D7 Plus in a stunning resolution fine structures and detail. HD 3D printing is now affordable for everyone. This high-resolution precision machine has a large building space compared with other DLP 3D printers. For its manufacturing quality it has unbelievable low costs.
The Wanhao Duplicator 7 DLP Plus 3D printer uses 3D printing technology of photopolymerization. Use this machine to realize small to medium-sized 3D prints in highresolution.
DLP stands for Digital Light Processing. This technology works with UV light to cure the liquid material (resin). The Wanhao Duplicator 7 DLP Plus uses exactly this technology to build up objects layer by layer from liquid resin.
Unlike its predecessor, you can control the D7 Plus intuitively via the integrated touch panel. Your prepared and sliced CAD data can be easily transferred via SD card or USB port to your 3D printer.
This small power package is equipped with a LCD display. Its resolution is 2560 x 1440 pixels. The display filters and selects UV light and enables an extremely high 3D print resolution. Despite its extremely low price you can achieve very good 3D printing results with this device.
- Very good price-performance ratio: Benefit from forward-looking 3D printing technology, which was previously reserved for the professional sector
- High resolution: Up to 0.025 mm (HD 25 μm)
- Fast production speed: 35 mm / hour
- Large building space: 120.96 mm x 68.5 mm x 180 mm
- High resolution for sharp details: 2560 x 1440 pixels
- 3D print easily from SD card
- Intuitive operation via touch screen
- Standalone system - without a PC
- Advanced users
- Professional users
- Precision mechanics
- Dental technicians
Otherwise, this 3D printer has the same features as the D7 1.5.
If you buy the Wanhao Duplicator D7 Plus you get a low-cost and high-resolution DLP 3D printer.
|Primary attributes of the technology||DLP LCD printer, entrance level resin printer. Full assembled. With nanopie inside, print through Flash Disk only.|
|Extruder system||405 nm UV lamp, DLP curving system|
|With Insulate cover or not||Yes. Total Blinding hood|
|Max printable area||120.96*68.5*180mm|
|Filament diameter/light||405nm UV light|
|Material support||405nm Resin|
|Max printing speed||30mm/hour|
|Case Material||Steel Case|
|Projection Size||5.5 inch LCD|
|Layer Thickness||35-100 micron|
|Platform Holder||4 bolt adjusting system|
|Rail locking system||Steel bolt locking frame|
|Platform||Aluminum building plate|
|Power supply unit||Inside 110 AND 250V(Auto Switch), 50/60Hz,
4.0A (input), and takes standard IEC cable
|Typical application||• A perfect printer for educators who intend to
use the printers in technical educatioin.
• Great printer for DIY hobbist.